All SB Steals Kits
How can I use other manufacturer's dies with the Epic Six?
Everything needed to cut QuicKutz, Sizzix Sizzlits™, Cuttlebug™, and BossKut™ dies is offered with the Epic Six tool.
low-profile chemically etched metalic dies
such as our own QuicKutz dies
), you will need to use the included "Cutting" platform. To cut, place your die on the platform with your paper or desired material you wish to cut on top of the the die. You will then need to place the cutting mat on top and then roll the platform through the tool using the turn lever on the side of the Epic Six. If you have concerns with the clarity of cut, you may wish to position your die on the sides of the platform rather than in the center.
To cut those
dies that are slightly thicker than low-profile metallic chemically etched dies
such as Sizzlits™ and Cuttlebug™ dies
), you may follow the same steps above using the "Embossing/Cutting" platform. If your die is not cutting well, you may add one to three sheets of regular paper underneath the die to act as a shim to increase the cutting force (
only as needed
and thicker dies manufactured by other companies (
such as Sizzix™
) may likewise be able to be cut with the Epic Six so long as the width does not exceed the 6" opening of the tool or 13" length of the cutting mat, but will require a second cutting mat (
additional cutting mat not included with purchase of Epic Six tool
) . To cut these dies, you will follow the same cutting steps outlined above but with using a second cutting mat as the base in place of a cutting platform.
Please note that while the Epic Six will cut other manufacturer's dies, QuicKutz cannot support dies or other products manufactured by other companies and is not responsible for any potential damage caused by using other products with our company's tools.
Scrapbook Supplies Online
14557 South 790 West, Suite A • Bluffdale, Utah 84065 • 801-462-6333
Powered by Network Solutions Online Store